Page 503 - Manual Oficina Polaris RZR XP 1000 17-18

ELECTRICAL

IGNITION / KEY SWITCH AWD / 2WD SWITCH (NO TURF MODE)
1. Disconnect the AWD / 2WD switch harness by
1. Disconnect the key switch harness by depressing the depressing the connector locks and pulling on the
connector lock and pulling on the connector. Do not connector. Do not pull on the wiring.
pull on the wiring.
2. Test between the 2 sets of outputs (AWD / 2WD). If
2. Test between the 4 sets of outputs (OFF / ACCY / ON any of the tests fail, replace the switch assembly.
/ START). If any of the tests fail, replace ignition
switch assembly. • Move the switch to AWD (ON). There should be
continuity between switch pins 2 and 3 as well as 3
• In the OFF position, there should be no continuity and 7.
between any of the pins.
• Move the switch to 2WD (NONE / OFF). There should
• Turn the key to ACCY position. There should be ONLY be continuity between pins 3 and 7.
contunity between switch pins A and B.
• Turn the key to ON position. There should be
continuity between switch pins A, B and D.
• Turn the key to START position. There should be
continuity between all the pins on the switch.

11

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 11.35
© Copyright Polaris Industries Inc.