Page 505 - Manual Oficina Polaris RZR XP 1000 17-18
P. 505
ELECTRICAL
HAZARD SWITCH (INT'L / TRACTOR) TURN/LIGHTS/HORN SWITCH (INT'L/
TRACTOR)
Testing
1. Disconnect the harness from the hazard switch. Testing
2. Test outputs in both the ON and OFF positions. If any 1. Disconnect the Turn/Lights/Horn switch by
of the tests fail, replace the switch. depressing the connector locks and pulling on the
connector. Do NOT pull on the wiring.
• Move switch to ON. There should be continuity
between switch pins 2 and 3. 2. Test between the sets of outputs. If any of the tests
fail, replace the switch assembly.
• Move the switch to OFF. There should be no continuity
between any switch pins. • Turn on the High Beam. There should be continuity
between switch pins 2 and 5.
• Turn on the Low Beam. There should be continuity
between switch pins 2 and 6.
• Turn on the Left Turn Signal. There should be
continuity between switch pins 1 and 8.
• Turn on the Right Turn Signal. There should be
continuity between switch pins 1 and 7.
• Depress the Horn. There should be continuity between
switch pins 3 and 4.
11
9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 11.37
© Copyright Polaris Industries Inc.
