Page 504 - Manual Oficina Polaris RZR XP 1000 17-18
P. 504
ELECTRICAL
TRANSMISSION / GEAR POSITION SWITCH SEAT BELT SWITCH
TESTING Location
Found on the driver’s seat belt latch
1. The transmission (gear position) switch q is located
on the RH side of the transmission and can be Functionality
accessed through the rear RH wheel well area. If the circuit is open (buckle undone) vehicle speed will
be limited to 15mph. If the circuit is closed (buckle
inserted), the vehicle will function normally.
Testing:
1. Disconnect the harness q running to the seat belt.
2. Disconnect the transmission switch harness by lifting
the connector lock and pulling on the connector. Do
not pull on the wiring.
3. Test the transmission switch continuity readings for
each gear position and compare to the specification
table below.
2. Using a multi-meter, measure between both pins on
RESISTANCE VALUE switch.
GEAR
POSITION WHEN MEASURED AT SWITCH SEAT BELT SEAT BELT
TERMINALS A AND B
DISENGAGED ENGAGED
HIGH 620 Ω
Between both ∞ (OL) < 1 Ω
LOW 300 Ω pins on switch
NEU 160 Ω
REV 75 Ω
PARK 24 Ω
11.36 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.