Page 251 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

ENGINE REMOVAL 6. Remove the PVT inlet and exhaust ducts. (See PVT
Sealing and Ducting Components, page 5.14)
NOTE
7. Remove the outer clutch cover, drive belt, drive
Some engine repair procedures can be performed clutch, driven clutch and inner clutch cover.
without removing the engine assembly from the vehicle.
Refer to “Accessible Engine Components” for further NOTE
information. Be sure to use the correct Drive Clutch Puller to prevent
The use of an overhead or portable engine hoist is the damage to crankshaft.
only recommended method for removing and installing
the engine.
8. Remove the fasteners retaining the airbox and the
Have an assistant help guide the engine in and out of airbox top. 3
the vehicle while using an engine hoist to prevent
personal injury or damage to vehicle components.

Drive Clutch Puller: PA-48595

WARNING
Always wear safety glasses and proper shop clothing
when performing the procedures in this Service
Manual.

Failing to do so may lead to possible injury.

1. If vehicle was recently operated, allow it to cool down
before attempting to perform any work.
2. Thoroughly clean the engine and chassis.
3. Disconnect the (-) negative battery cable from the
battery prior to engine removal. (see Battery
Removal, page 2.50)
4. Drain the engine oil (See Oil and Filter Change - 570,
page 2.20) and engine coolant (See Coolant Drain /
Fill, page 3.26) prior to engine removal.
5. Remove the seats, footwells, side panels, front cab
and fuel tank.(see BODY, page 10.7 and Fuel Tank
Removal, page 4.25)
NOTE

Removal of the front cab is not required for touring
models.Remove the right passenger footwell on touring
models when performing engine removal.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 3.129
© Copyright Polaris Industries Inc.