Page 262 - Manual Oficina Polaris RS1 2018 e 2019
P. 262
PVT SYSTEM
DRIVE CLUTCH DISASSEMBLY / SLIDER PLATE INSPECTION
INSPECTION Inspect the contact surface of the three slider plates.
Some wear is normal but if the slider plates start to
SHIFT WEIGHT INSPECTION
groove, then they should be replaced.
• Remove the fasteners retaining the shift weights.
• Inspect the contact surface of the weights. Some wear
is normal but if the weights start cupping on the contact
surface, then they should be replaced.
• Install weights and torque fasteners to specification.
TORQUE
Shift Weight Fasteners:
20 in-lb (2 Nm)
5.10 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.
