Page 263 - Manual Oficina Polaris RS1 2018 e 2019

PVT SYSTEM

DRIVE CLUTCH DISASSEMBLY 5. Inspect the cover bushing w for wear.
1. Before taking the clutch apart, be sure to mark the
stationary sheave, moveable sheave, spider and
cover with a reference mark.

6. Remove the spring spacer e and the spring r.

5
IMPORTANT
Failure to assemble the clutch exactly how it was taken
apart will cause the clutch to be out of balance and
require clutch replacement.

2. Place the drive clutch in a clutch compression tool.
3. Remove the six fasteners q retaining the drive clutch
cover.

7. Place the drive clutch holding tool t in a vise and
install the drive clutch on the tool.

4. Loosen and remove the clutch compression tool.

Drive Clutch Holding Fixture:
2871358-B

9928689 - 2018 RZR RS1 Service Manual 5.11
© Copyright Polaris Industries Inc.