Page 264 - Manual Oficina Polaris RS1 2018 e 2019

PVT SYSTEM

8. Install the clutch spider nut tool y on the spider nut 10.Remove the three sliders from the spider and
sleeve u and remove the sleeve. measure the thickness on both ends. Replace the
sliders if worn beyond the service limit.
Spider Nut Removal tool:
PU-50578

NOTE
The spider nut sleeve is torqued to

300 ft-lb (407 Nm)
A large breaker bar will be required to remove the
sleeve.

9. Lift up on the spider i to remove it from the clutch.

MEASUREMENT
Drive Clutch Sliders:
Service Limit: 0.075″ (1.905 mm)

11. Lift the moveable sheave o to remove it from the
shaft.

NOTE
The spider is splined to the stationary sheave. A light
rocking action will free the spider from the splines. A
commercially available 3-jaw puller may also be used to
help with spider removal.

12.Inspect the moveable sheave bearing a for wear. If
wear is present, replace the bearing.

5.12 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.