Page 265 - Manual Oficina Polaris RS1 2018 e 2019
P. 265

PVT SYSTEM


                   13.Remove the roller bearing s and the bushings d on  DRIVE CLUTCH ASSEMBLY
                      both sides of the bearing. If the outer surface is worn
                      off the bushings, they should be replaced.         1. Install the roller bearing s between the bushings d
                                                                            and install on the clutch shaft.





















                                                                         2. Install the moveable sheave o onto the shaft.
                                                                                                                              5




















                                                                         3. Install the spider i onto the clutch shaft.






















                                                                         4. Place the drive clutch holding tool t in a vise and
                                                                            install the drive clutch on the tool. Install the clutch
                                                                            spider nut tool y on the spider nut sleeve u and
                                                                            torque the nut to specification.
                                                                                       Spider Nut Removal tool:
                                                                                              PU-50578


                   9928689 - 2018 RZR RS1 Service Manual                                                              5.13
                   © Copyright Polaris Industries Inc.
   260   261   262   263   264   265   266   267   268   269   270