Page 337 - Manual Oficina Polaris RS1 2018 e 2019
P. 337
FINAL DRIVE
22.Remove washers 2 $ and front hub assemblies 2% 26.With a short, sharp jerk, remove both drive shafts
from either side of the vehicle. from the front gearcase.
23.Remove front lower shock mounting fastener 2^ from 27.Disconnect front prop shaft from the front gearcase.
either side of the vehicle. 28.swing upper control arm and shock up and out of the
way and remove front gearcase from the right side of
the vehicle.
7
24.Remove upper control arm pinch bolt 2& and remove
ball joint 2* from the steering knuckle on either side of
the vehicle.
25.Remove both front drive shafts from steering
knuckles.
9928689 - 2018 RZR RS1 Service Manual 7.31
© Copyright Polaris Industries Inc.
