Page 472 - Manual Oficina Polaris RS1 2018 e 2019

ELECTRICAL

VEHICLE SPEED SENSOR SPEED SENSOR TESTING
1. Disconnect the 3 wire harness from the speed
SPEED SENSOR LOCATION sensor and remove the sensor from the

The speed sensor q is located on the RH side of the transmission.
transmission, accessed through the rear RH wheel well.
2. Connect the wires from the Static Timing Light
Harness (2871745) to the sensor 3 pin connector
using the Hall Sensor Probe Harness ( 2460761).
3. Pass a screwdriver back and forth in front of the
sensor tip.
4. Be sure connections are good and 9V battery is in
good condition. If the light flashes, the sensor is
good.

11.24 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.