Page 256 - Manual Oficina Polaris RZR 570 13-18

PVT SYSTEM

5. Install the spider assembly onto the shaft threads. Be 8. Reinstall clutch spring a and limiter spacer s.
sure all of the alignment marks u are in alignment.

9. Reinstall cover f, aligning “X” mark with other marks.
ITEM DESCRIPTION
IMPORTANT
t Moveable Sheave If the aligning marks are not in alignment, the clutch will

y Spider not be in balance. The drive clutch assembly must be
replaced.
u Alignment Marks
10.Torque cover bolts d evenly to specification.
6. Install clutch onto holding fixture (PN 2871358-A) and
secure in a bench vice. Torque spider o to
specification using the holding fixture and spider tool
i. Torque spider to specification

TORQUE
Drive Clutch Cover Bolt:
100 in-lb (12 Nm)
TORQUE
Spider:
225 ft-lb (305 Nm)(Apply 0.4 mL Loctite® 7088
Primer and 0.4 mL Loctite® 620™)

7. Install shift weights using new lock nuts on the bolts.

5.24 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.