Page 330 - Manual Oficina Polaris RZR 570 13-18

FINAL DRIVE

REAR BEARING CARRIER REMOVAL
1. Elevate rear of vehicle and safely support machine
under the frame area.
CAUTION
Serious injury may result if machine tips or falls. Be
sure machine is secure before beginning this service
procedure. Wear eye protection when removing
bearings and seals.

2. Remove the four wheel nuts and remove the rear
wheel.
3. Remove the cotter pin q and rear wheel hub castle
nut w. Remove the two cone washers e from the
rear wheel hub assembly.

4. Remove and discard the two brake caliper mounting
bolts r.

CAUTION
Do not hang the caliper by the brake line. Use wire to
hang caliper to prevent damage to the brake line.

7.6 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.