Page 334 - Manual Oficina Polaris RZR 570 13-18

FINAL DRIVE

5. Install new brake caliper mounting bolts r and
torque to specification.

TORQUE
Rear Caliper Mounting Bolts:
44 ft-lbs (60 Nm)

CAUTION
New bolts have a pre-applied locking agent which is
destroyed upon removal. Always use new brake caliper
mounting bolts upon assembly.

6. Torque wheel hub nut to specification and install a
NEW cotter pin. Tighten nut slightly if necessary to
align cotter pin holes.

TORQUE
Rear Wheel Hub Castle Nut:
110 ft-lbs (149 Nm)

7. Install wheel and four wheel nuts. Torque wheel nuts
to specification.
TORQUE
Wheel Nuts:
RZR 570 Steel Rims: 36 ft-lbs (49 Nm)
RZR 570 EPS Alum. Rims: 120 ft-lb (163 Nm)
RZR S 570 Alum. Rims: 30 ft-lbs (41 Nm) + 90°

8. Rotate wheel and check for smooth operation. Bend
both ends of cotter pin around end of spindle in
different directions.

7.10 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.