Page 165 - Manual_Polaris_RZR_ProXP-20-21
P. 165
ENGINE / COOLING SYSTEM
16.Install the three fasteners retaining the muffler to the EXHAUST PIPE INSTALLATION
exhaust pipe. Torque fasteners to specification.
1. Install the head shielding and O2 sensor on the
TORQUE exhaust pipe. Torque to specification.
Exhaust Pipe to Muffler Fasteners: 2. Install the exhaust pipe into the chassis and first
18 ft-lb (24 Nm) install the exhaust pipe studs through the muffler
flange and then install the exhaust pipe fasteners
retaining the pipe to the turbocharger. Torque
17.Connect O2 sensor harness. fasteners to specification.
18.Install the right rear shock assembly. Torque 3. Install the two fasteners retaining the heat shield to
fasteners to specification. the exhaust pipe / turbo joint. Torque fasteners to 3
specification.
TORQUE
4. Install fasteners retaining the heat shield above the
Shock Mounting Fasteners:
valve cover. Torque fasteners to specification.
70 ft-lbs (95 Nm)
5. Install the two fasteners retaining the heat shield
above the O2 sensor. Torque fasteners to
specification.
6. Connect the O2 sensor harness and secure the
wiring.
7. Install the right rear shock assembly. Torque
fasteners to specification.
TORQUE
Oxygen Sensor:
13 ft-lb (18 Nm)
Exhaust Heat Shield Fasteners:
8 ft-lb (11 Nm)
Exhaust Pipe to Turbo Fasteners:
18 ft-lb (24 Nm)
Exhaust Pipe to Muffler Fasteners:
18 ft-lb (24 Nm)
Rear Shock Fasteners:
70 ft-lbs (95 Nm)
9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 3.21
© Copyright Polaris Industries Inc.
