Page 61 - Manual Oficina XP 1000 14-16

MAINTENANCE

TRANSMISSION AND FRONT GEARCASE

SPECIFICATION CHART

GEARCASE LUBRICANT CAPACITY FILL / DRAIN PLUG TORQUE
without turf mode: 2
44 oz
(1300 mL)
Transmission AGL with turf mode 14 ft-lbs (19 Nm)
(INT’L):
40.5 oz
(1200 mL)
8.5 oz
Front Gearcase Demand Drive Fluid 10 ft-lbs (14 Nm)
(250 mL)

TRANSMISSION LUBRICATION 3. If lubricant level is not even with bottom threads w,
add recommended lubricant as needed. Do not
NOTE overfill.
It is important to follow the transmission maintenance 4. Reinstall the fill plug and torque to specification.
intervals described in the Periodic Maintenance Chart.
Regular lubricant level inspections should be performed TORQUE
as well.
Transmission Fill / Drain Plug Torque:
14 ft-lbs (19 Nm)
The transmission lubricant level should be checked and
changed in accordance with the maintenance schedule.
Transmission Lubricant Change
• Be sure vehicle is positioned on a level surface when
checking or changing the lubricant. The drain plug is located on the bottom of the
• Check vent hose to be sure it is routed properly and transmission gearcase. Access the drain plug
unobstructed. through the drain hole in the skid plate.
5. Remove the fill plug (see Chapter 2 – Transmission
Transmission Lubricant Level Check
Lubrication, page 2.27).
The fill plug is located on the rear portion of the
transmission gearcase. Access the fill plug at the rear of 6. Place a drain pan under the transmission drain plug.
the vehicle. Maintain lubricant level even with the bottom 7. Remove drain plug e and allow lubricant to drain
of the fill plug hole. completely.
1. Position vehicle on a level surface.
2. Remove the fill plug q and check the lubricant level.

8. Clean the drain plug magnetic surface.
9. Reinstall the drain plug and torque to specification.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 2.27
© Copyright Polaris Industries Inc.