Page 62 - Manual Oficina XP 1000 14-16

MAINTENANCE

10. Add the recommended amount of lubricant through FRONT GEARCASE LUBRICATION
the fill plug hole. Maintain the lubricant level at the
bottom of the fill plug hole when filling the NOTE
transmission. Do not overfill.
It is important to follow the front gearcase maintenance
FLUID CAPACITY intervals described in the Periodic Maintenance Chart.
Regular fluid level inspections should be performed as
Recommended Transmission Lubricant: well.
AGL
Capacity: 44 oz (1300 mL) The front gearcase fluid level should be checked and
Capacity (INT’L): changed in accordance with the maintenance schedule.
40.5 oz (1200 mL)
• Be sure vehicle is positioned on a level surface when
checking or changing the fluid.
11. Reinstall the fill plug and torque to specification.
• Check vent hose to be sure it is routed properly and
unobstructed.
TORQUE
Transmission Fill / Drain Plug Torque: Front Gearcase Fluid Level Check
14 ft-lbs (19 Nm) The fill plug is located on the bottom right side of the front
gearcase. Access the fill plug through the right front
12. Check for leaks. Dispose of used lubricant properly. wheel well. Maintain fluid level even with the bottom of
the fill plug hole.
1. Position vehicle on a level surface.
2. Remove the fill plug q and check the fluid level.

3. If fluid level is not even with the bottom threads, add
the recommended fluid as needed. Do not overfill.
4. Reinstall the fill plug and torque to specification.

TORQUE
Front Gearcase Fill / Drain Plug Torque:
10 ft-lbs (14 Nm)

Front Gearcase Fluid Change:
The drain plug is located on the bottom of the front
gearcase. Access the drain plug through the access
hole in the frame underneath the front gearcase.
5. Remove the fill plug (see Chapter 2 – Front
Gearcase Lubrication, page 2.28).
6. Place a drain pan under the front gearcase drain
plug.

2.28 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.