Page 273 - Manual Oficina Polaris RZR XP 1000 17-18

PVT SYSTEM

DRIVE BELT

BELT REMOVAL 4. Insert clutch spreader tool w (2877408 or 2878925)
into the driven clutch as shown (tool included with
NOTE vehicle’s tool kit).
Inspect the entire clutch outlet duct (including the outlet NOTE
duct screen) when replacing a drive belt. Remove any
debris found in the outlet duct or outlet duct screen q. Make sure the tool is square with the moveable sheave
surface of the driven clutch.

5

1. Remove the eight screws that retain the outer clutch
cover. 5. Rotate tool towards the clutch to open the sheaves.
2. Maneuver the outer clutch cover outward as shown 6. Walk the belt out of the driven clutch and drive
below to access the drive belt. clutch. Remove the belt from the vehicle.

NOTE
Removal of left rear wheel or left rear shock is NOT
necessary for belt replacement.

3. Mark the drive belt direction of rotation so that it can
be installed in the same direction.

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 5.13
© Copyright Polaris Industries Inc.