Page 278 - Manual Oficina Polaris RZR XP 1000 17-18

PVT SYSTEM

SHIFT WEIGHT INSPECTION BUTTON TO TOWER CLEARANCE
1. Remove shift weight fasteners e and weights . INSPECTION
Inspect the contact surface of the weight q. The 1. Inspect the button to tower clearance as shown.
surface should be smooth and free of dents or gall Replace the drive clutch if clearance is beyond
marks. Inspect the weight pivot bore w and bolts for specification.
wear or galling. If weights or bolts are worn or
broken, replace in sets of three with new bolts and
nuts.

MEASUREMENT
Button to Tower Clearance:
.000-.012″ (.000-.304 mm)
WARNING
The clutch assembly is a precisely balanced unit. Never 2. Inspect the tower sheave surfaces. Replace the drive
replace parts with used parts from another clutch clutch if worn, damaged or cracked.
assembly!

NOTICE
A damaged shift weight is usually caused by a
damaged or stuck roller in the spider assembly. See
“Drive Clutch Roller Pin and Button Service”.

5.18 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.