Page 308 - Manual Oficina Polaris RZR XP 1000 17-18

TRANSMISSION

7. Remove the detent star o. Note how the detent star 12.Lift up on the shift shaft rail j and move the rail
fits onto the splined shaft with the raised edge facing assembly rearward to allow the shift fork pins k to be
outward for reassembly. removed from the shift drum l. Remove the shift
drum from the transmission housing.
8. Remove the spacer a.
9. Remove the shift shaft s, detent pawl d and the shift
sector gears f and g.
NOTICE

Note the timing marks on the shift gears for reassembly
purposes.

10.Remove the O-rings h from each shaft and discard.
Use new O-rings upon assembly.
11. Remove all the transmission case bolts. Using suit-
able pry bars, remove the cover using the designated
pry points (indicated by the black arrows in the illus-
tration below).
13.Remove the shift shaft rail j and shift forks from the
transmission housing as an assembly.

14.Remove the rear output shaft assembly 1( by lifting
underneath the gear or by tapping the shaft from the
opposite side.

CAUTION
Do not pry on case sealing surfaces.
Use only the designated pry points on the
transmission.

6.16 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.