Page 310 - Manual Oficina Polaris RZR XP 1000 17-18

TRANSMISSION

23.If necessary, disassemble the other end of the Snorkel Shaft Removal / Disassembly
reverse shaft. Remove the bearing , engagement
dog, retaining ring, washer, low gear d and needle CAUTION
bearing f from the reverse shaft. The pinion shaft must be removed prior to removing the
snorkel shaft assembly. Failure to remove pinion shaft,
will result in damage to the snorkel shaft.

25.Extract the seal 2^ from the snorkel shaft to access
the snorkel tube 2& for removal.

s Reverse Shaft h Washer

d Bearing j Low Gear 26.Using the Snorkel Tool, fully loosen the snorkel tube.
f Engagement Dog k Needle Bearing

g Snap Ring

24.To disassemble the shift shaft rail remove the snap
ring 2% from the end of the shift rail on either side.

Snorkel Tool:
PA-50231

CAUTION
Use caution when disassembling the shift rail. The
compressed springs on the shift rail may pop off
causing eye or face injury.

6.18 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.