Page 311 - Manual Oficina Polaris RZR XP 1000 17-18
P. 311
TRANSMISSION
27.Remove the snorkel tube and shaft assembly from 32.Remove the retaining ring to remove the remaining
the transmission case. washer, bearing and gear from the snorkel shaft.
28.Remove the snap ring 2* and shim 2 ( from the
snorkel shaft.
6
DIFFERENTIAL OPERATION
Transmissions equipped with Turf Mode have two
traction operational modes: Differential Lock and
Differential Unlock. Locking the rear differential is
beneficial in low traction and rough terrain conditions.
Unlocking the rear differential makes maneuvering easier
and minimizes damage to terrain.
29.Use an arbor press to remove the snorkel tube from
the snorkel shaft.
30.Remove the snap ring 3) and shim 3! retaining the
bearing in the snorkel tube.
When “Differential-Unlock” is selected, the rear
differential becomes unlocked for tighter turns. An
electrical solenoid mounted in the rear portion of the
gearcase actuates the shift fork. The solenoid plunger
extends out to move the fork and slides the engagement
dog away from the side gear that is part of the planetary
31.Lightly tap on the bearing from the opposite side to differential assembly. This unlocks the rear differential.
remove it from the snorkel tube.
The rear drive shafts are now dependent on the
differential allowing for tighter turns.
9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 6.19
© Copyright Polaris Industries Inc.
