Page 334 - Manual Oficina Polaris RS1 2018 e 2019

FINAL DRIVE

6. Inspect the roller surface on the inside of the ring gear FRONT GEARCASE REMOVAL
for gouging/rough spots.
1. Locate front prop shaft roll pin and use Roll Pin
Removal Tool to remove the roll pin. Discard roll pin.

7. Inspect the roll cage o assembly for cracks or
excessive wear. If damaged, replace the roll cage
assembly. 2. Disengage 1/4 turn latches q and remove the hood.
8. Inspect the rollersa for nicks and scratches. The
rollers must slide up, down, in and out freely within
the roll cage sliding surfaces and H-springs.

3. Remove storage box.

7.28 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.