Page 336 - Manual Oficina Polaris RS1 2018 e 2019
P. 336
FINAL DRIVE
15.Remove two mounting fasteners f from RH steering 18.Remove two fasteners l and remove wheel scrapers
rack mounting cast g and remove the mounting cast. 1( from either side of the vehicle.
16.Remove two mounting fasteners h from LH steering 19.Remove front brake caliper mounting bolts 2) from
rack mounting cast j. Leave mounting cast in its the vehicle and remove brake caliper 2!. Repeat for
position. opposite side of vehicle.
17.Remove fastener k retaining lower stabilizer bar link. 20.Repeat previous step for the right side of the vehicle.
Repeat on opposite side of vehicle. 21.Remove cotter pin 2@ and castle nut 2# from both
front hubs.
7.30 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.
