Page 704 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ELECTRICAL

FUEL SENDER

TESTING

1. Drain the fuel tank and remove it from the ATV.
2. Set the fuel tank on a flat surface.
3. Hook up an ohm meter to the fuel sender harness wire (B) and wire (C).
4. With the sender float in the empty position, the meter should read 6 ohms.
5. Slowly tilt invert the tank so that gravity moves the sender float to the full position, the meter should now read 90
ohms.

6. If the readings are not between 6 ohms and 90 ohms, or if the reading is erratic or LCD display “sticks”, check the
following before replacing the tank assembly.
• Loose float
• Float contact with tank
• Bent Float Rod

If none of the conditions exists, the sender assembly is faulty.

NOTE
**In the event of a failure, fuel tank assembly replacement is required on ALL models, as the sender assembly or
pump assembly is not serviceable.

11.42 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.